[High Dynamic]; [Photo Frame] - Panasonic Lumix VQT2F10 Operating Instructions Manual

You can use this mode to easily record pictures in which bright and dark regions of the
scene are expressed with suitable brightness when looking into the sun, at night, or in
similar circumstances.
∫ Setting the effect
1 Press 3/4 to select the effect to use, and then press [MENU/SET].
•
It is also possible to change the settings using the quick menu.
[ ]:
[ ]:
[ ]:
2 Take pictures.
Note
•
[SENSITIVITY] is fixed to [ISO400].
•
Compensation effect may not be achieved depending on the conditions.
•
The shutter may remain closed (max. about 8 sec.) after taking the picture because of signal
processing. This is not a malfunction.
•
The focus range is 1 cm (0.04 feet) (Wide)/2 m (6.57 feet) (Tele) to ¶.
Record the image with a frame around it.
∫ Setting the frame
1 Press 2/1 to select the frame to use, and then press [MENU/SET].
•
The number of pixels is fixed to 2M (4:3).
2 Take pictures.
Note
•
It will be a normal motion picture recording during the motion picture recording.
Frame will not be displayed.
•
[AUTO REVIEW] is fixed to [2SEC.].
•
The color of the frame displayed on the screen and the color of the frame around the actual
image may differ, but this is not a malfunction.
Advanced (Recording pictures)

[HIGH DYNAMIC]

Natural color effect
Eye-catching effect which emphasises contrast and color
Black and white effect

[PHOTO FRAME]

- 107 -
(P29)