[REC] Mode:
Taking pictures by specifying the aperture /
shutter speed
Set the aperture value to a higher number when you want a sharp focus background. Set
the aperture value to a lower number when you want a soft focus background.
Set the [REC]/[PLAYBACK] selector switch to [!], and then set the
mode dial to [
Tilt the joystick towards 3/4 to set the
aperture value.
Take a picture.
When you want to take a sharp picture of a fast moving subject, set with a faster shutter
speed. When you want to create a trail effect, set to a slower shutter speed.
Set the [REC]/[PLAYBACK] selector switch to [!], and then set the
mode dial to [
Tilt the joystick towards 3/4 to set the
shutter speed.
Take a picture.
Note
•
Refer to
P82
for the available aperture values and the shutter speed.
•
The brightness of the LCD monitor/Viewfinder and the recorded pictures may differ. Check the
pictures using the review function or Playback Mode.
•
Set the aperture value to a higher number when the subject is too bright. Set the aperture value
to a lower number when the subject is too dim.
•
The aperture value and the shutter speed displayed on the screen turn red when the exposure
is not adequate.
•
We recommend using a tripod when the shutter speed is slow.
•
[
] cannot be set for shutter-priority AE
Advanced (Recording pictures)
Aperture-priority AE
].
Shutter-priority AE
].
- 80 -