[Face Recog.] - Panasonic Lumix VQT2F10 Operating Instructions Manual

∫ Auto White Balance
Depending on the conditions prevailing when pictures are taken, the pictures may take on
a reddish or bluish tinge. Furthermore, when a multiple number of light sources are being
used or there is nothing with a color close to white, Auto White Balance may not function
properly. In a case like this, set the white balance to a mode other than [AWB].
1 Auto White Balance will work within this range.
2 Blue sky
3 Cloudy sky (Rain)
4 Shade
5 TV screen
6 Sunlight
7 White fluorescent light
8 Incandescent light bulb
9 Sunrise and sunset
10 Candlelight
KlKelvin color Temperature
∫ Setting the color temperature
You can set the color temperature manually for taking natural pictures
in different lighting conditions. The color of light is measured as a
number in degrees Kelvin. As the color temperature increases, the
picture becomes more bluish. As the color temperature decreases,
the picture becomes more reddish.
1
Select [ ] and then press 1.
2
Press 3/4 to select the color temperature and then press [MENU/SET].
Note
•
You can set a color temperature from [2500K] to [10000K].
For details on [REC] Mode menu settings, refer to P27.
Specify a person's face and use the Face Recognition functions.
Applicable modes:
[OFF]/[ON]/[MEMORY]/[SET]
Note
•
Refer to P117 for details.
Advanced (Recording pictures)

[FACE RECOG.]

- 135 -
2)
3)
4)
5)
6)
1)
7)
8)
9)
10)