[Metering Mode]; [I.exposure] (Intelligent Exposure Adjustment) - Panasonic Lumix VQT2F10 Operating Instructions Manual

For details on [REC] Mode menu settings, refer to P27.
Type of optical measurement to measure brightness can be changed.
Applicable modes:
[C]: Multiple
This is the method in which the camera measures the most
suitable exposure by judging the allocation of brightness on the
whole screen automatically. Usually, we recommend using this
method.
[ ]: Center weighted
This is the method used to focus on the subject on the center
of the screen and measure the whole screen evenly.
[Ù]: Spot
This is the method to measure the subject in the spot metering
target A.
Note
•
When [C] is selected and [AF MODE] is set to [š], the camera will adjust the exposure to suit
the person's face.

[I.EXPOSURE] (Intelligent exposure adjustment)

For details on [REC] Mode menu settings, refer to P27.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
Applicable modes:
[OFF]/[LOW]/[STANDARD]/[HIGH]
Note
•
[ ] is displayed when it is set to either [LOW], [STANDARD], or [HIGH].
•
Even when the [SENSITIVITY] is set to [ISO80]/[ISO100], [SENSITIVITY] may be set higher
than [ISO80]/[ISO100] if the picture is taken with [I.EXPOSURE] set to valid.
•
Compensation effect may not be achieved depending on the conditions.
•
[ ] in the screen turns to yellow when [I.EXPOSURE] is in effect.
•
[LOW], [STANDARD], or [HIGH] represents the maximum range of effect.
•
This will be fixed to [OFF] when set to [
Advanced (Recording pictures)

[METERING MODE]

] and [
- 142 -
] in [QUALITY].