[Hi-Speed Burst] - Panasonic Lumix VQT2F10 Operating Instructions Manual

This is a convenient mode for shooting rapid movement or a decisive moment.
∫ Picture size and aspect ratio
1
Press 3/4 to select [SPEED PRIORITY] or [IMAGE PRIORITY] and then press
[MENU/SET] to set.
2
Press 3/4 to select the picture size and aspect ratio and then press [MENU/
SET] to set.
•
3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size.
3 Take pictures.
•
Still pictures are taken continuously while the shutter button is pressed fully.
Maximum Burst speed
Number of recordable
pictures
•
The burst speed changes according to the recording conditions.
•
The number of burst recording pictures are limited by the picture-taking conditions and the type
and/or status of the card used.
•
The number of burst recording pictures increase immediately after formatting.
Note
•
It will be a normal motion picture recording during the motion picture recording.
•
The flash setting is fixed to [Œ].
•
[QUALITY] is automatically fixed to [›].
•
You can take pictures suitable for 4qk6q/10k15 cm printing.
•
The focus range is 1 cm (0.04 feet) (Wide)/2 m (6.57 feet) (Tele) to ¶.
•
The focus, zoom, exposure, white balance, shutter speed and ISO sensitivity are fixed to the
settings for the first picture.
•
The ISO sensitivity is automatically adjusted. Note, however, that the ISO sensitivity is set high
to achieve a high shutter speed.
•
Depending on the operating conditions, it may take time to take the next picture if you repeat
taking a picture.
Advanced (Recording pictures)

[HI-SPEED BURST]

approx. 10 pictures/second (Speed priority)
approx. 6 pictures/second (Image priority)
approx. 15 to 100
- 100 -