You can take pictures with connections suitable for creating panorama images.
∫ Setting the recording direction
1
Press 3/4 to select the recording direction and then press
[MENU/SET].
•
The horizontal/vertical guideline will be displayed.
2
Take the picture.
•
You can retake the picture by selecting [RETAKE].
3
Press 3 to select [NEXT] and then
press [MENU/SET].
•
You can also press the shutter button halfway to set the menu.
•
Part of the recorded image is displayed as a transparent image.
4
Take picture after moving the camera horizontally or
vertically so the transparent image overlaps.
•
When taking the third and later pictures, repeat steps
•
You can retake the picture by selecting [RETAKE].
5
Press 3/4 to select [EXIT] and then
press [MENU/SET].
Note
•
It will be a normal motion picture recording during the motion picture recording.
•
The flash setting is fixed to [Œ].
•
The focus, zoom, exposure, white balance, shutter speed and ISO sensitivity are fixed to the
settings for the first picture.
•
The shutter may remain closed (max. about 8 sec.) after taking the picture because of signal
processing. This is not a malfunction.
•
We recommend using a tripod.
•
The recorded images can be combined into panorama pictures using the software "ArcSoft
Panorama Maker" on the CD-ROM (supplied).
Advanced (Recording pictures)
[PANORAMA ASSIST]
- 96 -
3
4
and
.