Recording Mode:
Taking Pictures using the Built-in Flash
A To open the flash
B To close the flash
•
Be sure to close the flash when not in use.
•
The flash setting is fixed to [Œ] while the flash
is closed.
Note
•
Be careful not to catch a finger when closing a flash bulb.
Applicable modes:
Set the built-in flash to match the recording.
•
Open the flash.
1
Select [FLASH] in the [REC] Mode menu.
2
Press 3/4 to select a mode and press [MENU/SET].
•
Exit the menu after it is set.
Switching to the appropriate flash setting
Recording
Slide the flash open
lever.
(P56)
- 72 -
Press the flash until
it clicks.