Table of Contents
Advertisement
Chapter 2 Preparations
1.12.1 Installing an expansion 2.5-inch HDD cage
For 2.5-inch Hard Disk Drive models, you can install an additional two Hard Disk Drives by using a 2.5-inch
HDD cage.
Install the 2.5-inch HDD cage for additional drives by using the following procedure.
1.
Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Remove the side cover and front bezel while referring to Chapter 2 (1.4 Removing the Side Cover and
1.5 Removing the Front Bezel).
3.
Pull the blank panel toward you while pressing the
tab on the right.
4.
Remove the two screws from the blank cover.
5.
Remove the two screws from the blank panel and
detach the rails.
6.
Attach the rails you removed in step 5 to the HDD
cage. Use the screws you removed from the blank
panel.
Tips
An expansion 2.5-inch HDD cage is only supported by air-cooled models.
Important
Keep the removed blank panel for future use.
Express5800/GT110d-S User's Guide
1. Installing Internal Optional Devices
95
Advertisement
Table of Contents
