Chapter 2 Preparations
2.5-inch Hard Disk Drive model/water-cooling system
Product
Model name
name
N8103-107
SCSI controller
(Card performance: PCI EXPRESS (x1))
N8103-128
RAID Controller (128 MB, RAID 0/1/5/6)
(Card performance: PCI EXPRESS 2.0 (x8))
N8103-134
RAID Controller (512 MB, RAID 0/1/5/6)
(Card performance: PCI EXPRESS 2.0 (x8))
N8103-129
RAID Controller (256 MB, RAID 0/1)
(Card performance: PCI EXPRESS 2.0 (x8))
N8103-130
RAID Controller (256 MB, RAID 0/1/5/6)
(Card performance: PCI EXPRESS 2.0 (x8))
N8104-134
1000BASE-T connection board(2 ch)
(Card performance: PCI EXPRESS (x4))
− Cannot be installed
Can be installed
*1 Lane:
Indicates the transfer performance (transfer bandwidth).
<e.g.> 1 lane = 2.5 Gbps (unidirectional), 4 lanes = 10 Gbps (unidirectional)
Socket: Indicates the connector size. A card up to the number of sockets can be connected.
<e.g.> x4socket = x1card, x4card can be installed. x8 card cannot be installed.
*2 The N8117-01A expansion RS-232C connector kit contains two types of cables. This server uses the RS-232C
cable (B).
•
The depth of mountable boards is up to 167.6 mm (MD2).
•
For details of functions of each card, refer to the technical guide.
•
The card performance described in the parentheses after the Product name indicates the maximum operation
performance of the card.
•
Even if you use PCI cards of a higher performance than the PCI slot, the operation of the device will be that of
the PCI slot.
About the standard network
You can use functional equivalents of AFT/SFT/ALB teaming with the standard network and the following LAN
cards:
N8104-134
PCI#1
*1
PCI slot performance
X4lane
Slot size
X8
*1
PCI card type
socket
Available card size
Up to167.6 mm (MD2)
−
Express5800/GT110d-S User's Guide
1. Installing Internal Optional Devices
PCI EXPRESS 2.0
PCI#2
X4lane
Low Profile
x8
socket
Connects to internal and external devices
−
Connects with internal drives
Can mount internal battery N8103-141 (450
mm cable)
−
−
Connects with internal drives
Can mount internal battery N8103-121
−
For adding LAN
Teaming (AFT/SFT/ALB) and bonding with
N8104-134 and on-board LAN is supported.
Up to 2 teams per system. Up to 2 ports per
team.
Remarks
83