Table of Contents
Advertisement
Chapter 2 Preparations
1.4
Removing the Side Cover
Remove the side cover by using the following procedure.
1.
Refer to steps 1 to 3 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Unlock the padlock attached to the chassis if
applicable.
3.
Lay it so that the side cover faces upward. Lay it
down slowly and gently.
4.
Remove the side cover. While pressing the two eject
buttons, slide the cover backward and lift it off.
Important BRACKET KEY: This equipment is intended for installation in a location with
restricted access.
Access can only be gained by service persons or by users who have
been instructed about the reasons for the restrictions applied to the
location and about any precautions to be taken.
Access can be obtained through the use of a special tool or lock and
key, or other means of security. This tool is controlled by the authority
responsible for the location.
Express5800/GT110d-S User's Guide
1. Installing Internal Optional Devices
Eject button
Eject button
47
Advertisement
Table of Contents
