Chapter 2 Preparations
Backplane for 2.5-inch Hard Disk Drives
(Installed on 2.5-inch model as standard)
(a)
When using on-board RAID Controllers (LSI Embedded MegaRAID
By changing the jumper setting for RAID configuration on the motherboard, the internal Hard Disk Drive can
be recognized as a software-controlled RAID System Hard Disk Drive.
Jumper settings on the motherboard and backplane
Change the jumper pin settings as described below.
Jumper pins on motherboard (SWRAID)
Enabled: 2-3 / Disabled: 1-2 (Default value)
Backplane for 2.5-inch Hard Disk Drive (provided with 2.5-inch models) (J7)
1
N8103-128/129/130/134
2
3
1
N8103-128/129/130/134
2
3
Express5800/GT110d-S User's Guide
1. Installing Internal Optional Devices
1
On-board SATA
2
controller
3
TM
)
1
On-board SATA
2
controller
3
55