Table of Contents
Advertisement
Chapter 2 Preparations
1.5
Removing the Front Bezel
Remove the front bezel by using the following procedure.
1.
Refer to steps 1 to 3 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Release the three release tabs on the front bezel (1)
in the direction of the arrow shown in the image and
then pull the front bezel forward slightly until it comes
off the frame (2).
3.
Slide the front bezel upward to release the hooks that
engaged with the three holes at the lower part of the
server and take it off the server.
48
Important
If you pull the front bezel forward too much, you will break the lower hook.
Gently slide it to prevent damaging the equipment.
Express5800/GT110d-S User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
