Table of Contents
Advertisement
Chapter 2 Preparations
6.
Orient the component side of the card toward the bottom of the server. When the rear panel of the
card is firmly engaged with the spring, firmly press the card into the slot so that the component parts
of the card securely connect to the slot.
The guide of the frame
7.
Close the PCI slot retention.
When it locks, you hear a clicking sound.
8.
Assemble the server.
9.
Turn on the server and confirm that no error messages are displayed in POST.
If an error message is displayed, take notes on the message and ask your maintenance service
company for maintenance.
1.10.4 Configuration after installing
Depending on the type of card installed, you might need to use a utility (the BIOS setup utility included with
this server or a setup utility provided with the card) following installation to modify server settings.
Follow the instructions in the manual provided with the card to specify the correct settings.
After turning the server power on, the PCI bus numbers are scanned in ascending order. If the option ROM
installed in the card contains a BIOS utility, the startup message (banner) is displayed in ascending order of
the PCI bus numbers.
Important
If you have trouble installing the card, remove the card once and try again. If
you apply excessive pressure on the card, there is a risk of breaking the
card.
Express5800/GT110d-S User's Guide
1. Installing Internal Optional Devices
85
Advertisement
Table of Contents
