Table of Contents
Advertisement
Chapter 2 Preparations
Installing the connection board
Install the connection board to the RAID Controller.
(1)
Orient the remote battery connection board so that it will fit the connector on the RAID Controller
and fix it with three screws from the rear side.
(2)
After connecting the connection board, place and fix the RAID Controller in the PCI slot, paying
attention not to disconnect the cable.
Installing a RAID Controller
Install the RAID Controller into the PCI slot of the server.
Express5800/GT110d-S User's Guide
1. Installing Internal Optional Devices
RAID Controller
71
Advertisement
Table of Contents
