Installing The Switch - HP HPE FlexFabric 5930 Installation Manual

Installing the switch

CAUTION:
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open
the chassis, contact Hewlett Packard Enterprise for permission. Otherwise, Hewlett Packard
Enterprise shall not be liable for any consequence caused thereby.
Figure 1 Hardware installation flow
No
Start
Install the switch
Ground the switch
Install fan trays
Install power supplies
Connect the power cords
Verify the installation
Power on the switch
Operating correctly?
Yes
Install interface cards?
Yes
Install interface cards
Operating correctly?
Yes
End
Resolve the problem
No
Power off the switch
No
Resolve the problem
7