Appendix A Chassis views and technical
specifications
Chassis views
HPE 5930-32 QSFP+/HPE 5930-32 QSFP+ TAA
Figure 50 Front panel
(1) QSFP+ port
(3) System status LED (SYS)
Figure 51 Rear panel
(1) Grounding screw (auxiliary grounding point 2)
(3) Serial console port
(5) Fan tray slot 2
(7) Power supply slot 2
(9) USB mini console port
(11) ACT LED for the management Ethernet port
The HPE 5930-32 QSFP+/HPE 5930-32 QSFP+ TAA switch comes with the two power supply slots
empty and a filler panel as an accessory. You can install one or two power supplies for the switch as
needed. In
Figure
information about installing and removing power supplies, see
The HPE 5930-32 QSFP+/HPE 5930-32 QSFP+ TAA switch comes with the two fan tray slots empty.
You must install two fan trays of the same model for the switch. In
fan trays are installed in the fan tray slots. For more information about installing and removing fan
trays, see
"Installing/removing a fan
51, two 650W AC power supplies are installed in the power supply slots. For more
tray."
(2) QSFP+ port LED
(2) Management Ethernet port
(4) Fan tray slot 1
(6) Power supply slot 1
(8) USB port
(10) LINK LED for the management Ethernet port
"Installing/removing a power
44
Figure
51, two LSWM1HFANSC
supply."