Enabling Telnet In Windows; Communicating Scpi Using Keysight Connection Expert - Keysight N9000A Manual

SCPI Programming Fundamentals
Simple SCPI Communication Methods
Figure 2-6 Command Window and ipconfig Results

Enabling Telnet in Windows

In newer versions of Microsoft Windows (Windows Vista and Windows 7), the Telnet client is disabled by default. To
enable the Telnet client, do the following:
Step
1. Open Windows Control Panel
2. Select Programs
3. Display Windows Features dialog
4. Enable Telnet client

Communicating SCPI using Keysight Connection Expert

You can use Keysight Connection Expert to communicate with devices on any supported network type. Keysight
Connection Expert is installed as part of the
Figure 2-7 below shows part of the Keysight Connection Expert main screen, with one N9020A instrument connected via
LAN.
Actions
From the Windows Start menu, select Control Panel.
In the Programs and Features group, click Turn Windows features on or off.
The Windows Features dialog appears.
In the listbox, locate Telnet client and check its checkbox.
Click OK.
Keysight I/O Libraries Suite.
28