Determining Instrument Ip Address - Keysight N9000A Manual

Figure 2-4 Command Window and ping Command results

Determining Instrument IP Address

1. If necessary, close the Keysight Signal Analyzer application, by selecting File > Exit from the front panel and softkey
menu, then confirming that you want to close the application.
2. When you can see the Windows desktop, move the cursor to the bottom of the screen using a mouse or the keyboard,
to reveal the Windows Taskbar. In the Windows Taskbar, click Start, Run.
3. In the Window Run Dialog (shown in
window.
Figure 2-5 Windows Run Dialog
4. At the DOS command prompt, enter "ipconfig", and press Enter.
The results should resemble the window shown in
Area Connection.
Figure 2-5), type "cmd" then click OK or press Enter to open a DOS command
Figure 2-6. The IP Address is listed under Ethernet adapter Local
27
SCPI Programming Fundamentals
Simple SCPI Communication Methods