Safety Notices - Keysight N9000A Manual

Notices
© Keysight Technologies 2008-2014
No part of this manual may be
reproduced in any form or by any
means (including electronic storage
and retrieval or translation into a
foreign language) without prior
agreement and written consent from
Keysight Technologies, Inc. as
governed by United States and
international copyright laws.
Manual Part Number
N9020-90112
Print Date
August 2014
Supersedes: February 2013
Printed in USA
Keysight Technologies Inc.
1400 Fountaingrove Parkway
Santa Rosa, CA 95403
Warranty
The material contained in this
document is provided "as is," and is
subject to being changed, without
notice, in future ed itions. Further, to
the maximum extent permitted by
applicable law, Keysight d isclaims
all warranties, either express or
implied, with regard to this manual
and any information contained
herein, includ ing but not limited to
the implied warranties of
merchantability and fitness for a
particular purpose. Keysight shall not
be liable for errors or for incidental or
consequential damages in
connection with the furnishing, use,
or performance of this document or
of any information contained herein.
Should Keysight and the user have a
separate written agreement with
warranty terms covering the material
in this document that conflict with
these terms, the warranty terms in
the separate agreement shall control.
Technology Licenses
The hard ware and/or software
described in this document are
furnished under a license and may be
used or copied only in accordance
with the terms of such license.
Restricted Rights Legend
If software is for use in the
performance of a US Government
prime contract or subcontract,
Software is delivered and licensed as
"Commercial computer software" as
defined in DFAR 252.227-7014 (June
1995), or as a "commercial item" as
defined in FAR 2.101(a) or as
"Restricted computer software" as
defined in FAR 52.227-19 (June 1987)
or any equivalent agency regulation or
contract clause. Use, duplication or
disclosure of Software is subject to
Keysight Technologies' standard
commercial license terms, and
non-DOD Departments and Agencies
of the US Government will receive no
greater than Restricted Rights as
defined in FAR 52.227-19(c)(1-2)
(June 1987). U.S. Government users
will receive no greater than Limited
Rights as defined in FAR 52.227-14
(June 1987) or DFAR 252.227-7015
(b)(2) (November 1995), as applicable
in any technical data.

Safety Notices

CAUTION
A CAUTION notice denotes a hazard. It
calls attention to an operating
procedure, practice, or the like that, if
not correctly performed or adhered to,
could result in damage to the product
or loss of important data. Do not
proceed beyond a CAUTION notice
until the indicated conditions are fully
understood and met.
WARNING
A WARNING notice denotes a hazard.
It calls attention to an operating
procedure, practice, or the like that, if
not correctly performed or adhered to,
could result in personal injury or
death. Do not proceed beyond a
WARNING notice until the indicated
conditions are fully understood and
met.