Adjusting The Center Stapling Position - Konica Minolta bizhub C352 User Manual

12
Note
If the angle of the center folding position must be adjusted, contact your
technical representative.

Adjusting the center stapling position

The stapling position when printing with the "Center Staple" setting can be
adjusted for each paper size and for each paper type.
0 Adjust the center folding position before adjusting the center stapling po-
sition.
0 Before making any adjustments, use the "Fold & Staple" function to print
a single sample copy. Perform the adjustment while checking the sample
that was created.
1
Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer to
"Displaying the Administrator Setting screen" on page 12-47.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [3 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [1 Center Staple Position].
The Center Staple Position screen appears.
6
Touch the buttons for the paper size and paper type to be adjusted.
12-60
Utility
C352