To Scan During Warm-Up - Konica Minolta bizhub C352 User Manual

Before making copies

To scan during warm-up

1
Press the sub power switch.
– For details on turning on the machine, refer to "To turn on the ma-
chine" on page 2-25.
The indicator on the [Start] key lights up in orange.
After the warm-up message is displayed, the Basic screen appears.
The indicator on the [Start] key lights up in green.
2
Check that the message "Now warming up. Ready to scan." appears
on the touch panel.
3
Position the original to be copied.
– For details on positioning the original to be copied, refer to "Feed-
ing the original" on page 3-7.
4
Specify any necessary copy settings.
5
Using the keypad, specify the desired number of copies.
– For details on specifying the number of copies, refer to "General
copy operation" on page 3-2.
6
Press the [Start] key.
The original is scanned, and the job is added to the list of queued jobs.
7
Check that the original has finished being scanned, and then position
the next original.
8
Specify new copy settings and the desired number of copies, and then
press the [Start] key.
– After the machine has finished warming up, the jobs will automati-
cally be printed in the order that they were queued.
To stop the job being printed
?
C352
2
2-27