Konica Minolta bizhub C352 User Manual page 553

12
!
Detail
The operation of the "Prohibit Functions when Auth. Error" parameter is
performed with the following passwords.
User authentication passwords, account track passwords, box pass-
words, passwords for confidential documents, and the administrator
password
If the control panel cannot be operated even after touching [Release]
from the "Prohibit Functions when Auth. Error" parameter to specify the
items whose operation restrictions are canceled or if operation is prohib-
ited from a failed attempt to authenticate the administrator password, re-
start the machine.
Reminder
When the machine is turned off, then on again with the main power
switch, wait at least 10 seconds to turn the machine on after turning it off.
The machine may not operate correctly if it is turned on immediately after
being turned off.
Enhanced Security Mode
Description
Settings necessary for applying the Enhanced Security mode appear. Select whether or not to
apply enhanced security settings when the necessary settings are specified. For details, contact
your technical representative.
HDD Setting
Parameter
Check HDD Capacity
Temporary Data Over-
write Setting
12-44
Description
Specify settings for using boxes. For details, refer to the Box Oper-
ations of the User's Guide.
Select whether or not image data is temporar-
ily written to the hard disk with all operations
for copying, scanning, faxing and computer
printing. For details on the settings, refer to
the [Box Operations of the User's Guide]. By
specifying a setting on the Temporary Data
Overwrite Setting screen, the area of the hard
disk where image data is saved can be over-
written after the data is printed or sent, and
the data can be erased. This process prevents
disclosure of image data on the hard disk.
Utility
Default Setting
OFF
C352