Adjusting The Finisher; Adjusting The Center Stapling Position - Konica Minolta BIZHUB C250 User Manual

12
12.7

Adjusting the finisher

!
Detail
For details on the "Fold & Staple" setting, refer to "To bind copies at the
center ("Fold & Staple")" on page 3-77.

Adjusting the center stapling position

The stapling position when printing with the "Fold & Staple" function can be
adjusted.
0 Before making any adjustments, use the "Fold & Staple" function to print
a single sample copy. Perform the adjustment while checking the sample
that was created.
1
Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer to
"Displaying the Administrator Setting screen" on page 12-43.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [3 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [1 Center Staple Position].
The Center Staple Position screen appears.
12-54
Utility
C250