Konica Minolta bizhub C352 User Manual page 543

12
Parameter
Job
Reset
Reminder
If user authentication or account track operations are being performed,
they will be canceled after 1 minute, even if the "System Auto Reset" pa-
rameter has been set to "OFF". However, the Enlarge Display mode is not
canceled when the "System Auto Reset" parameter is set to "OFF".
If user authentication settings have been specified or "Enhanced Security
Mode" has been set to "ON", logout from Administrator mode or user au-
thentication mode will be performed according to the "System Auto Re-
set Time" parameter.
12-34
Description
When ac- Select whether or not the settings are re-
count is set when the user has changed.
changed This machine detects that the user has
changed when the optional key counter
has been removed or when the [Access]
key is pressed after entering user au-
thentication and account track informa-
tion.
When orig- Select whether or not the settings are re-
inal is set set when an original is loaded into the
on ADF ADF.
When Staple Setting:
NEXT JOB Select whether the same Staple setting
is selected from the previous job is set or the setting
is canceled when that job begins and the
settings for the next job can be speci-
fied.
Original Set/Bind Direction:
Select whether the same Original Direc-
tion and Margin settings from the previ-
ous job are set or the settings are
canceled when that job begins and the
settings for the next job can be speci-
fied.
Reset Data After Job:
Select whether the same settings for a
scan operation or for a fax transmission
from the previous job are set or the set-
tings are canceled when that job is com-
pleted and the settings for the next job
can be specified. (However, even if
"OFF" is selected, the destination is
cleared.)
Utility
Default Setting
Reset
Do Not Reset
OFF
OFF
ON
C352