Basic copy operations
–
Touch [Auto] to automatically determine the stapling position ac-
cording to the orientation of the loaded original. If the original length
is 297 mm or less, the long side of the paper is stapled. If the orig-
inal length is more than 297 mm, the short side of the paper is sta-
pled.
–
If "Auto" is selected, the stapling position is set at the top or at the
left.
–
To cancel changes to the stapling position, touch [Cancel].
–
To specify the output tray, touch the button for the desired tray un-
der "Output Tray".
4
Touch [OK].
The Basic screen appears again.
C352
3
3-77