To Copy Using The "Ohp Interleave" Function - Konica Minolta bizhub C352 User Manual

Application functions

To copy using the "OHP Interleave" function

0 The Finishing setting cannot be changed.
0 The number of copies is set to "1" and cannot be changed.
1
Position the original to be copied.
– For details on positioning the original, refer to "Feeding the original"
on page 3-7.
2
Load OHP into the bypass tray or the tray 1. Load the interleaf paper
into the desired paper tray.
– Use interleaf paper with the same size as the OHP, and load them
in the v orientation.
3
Touch [OHP], and then touch [OK].
– If the OHP are loaded into the tray 1, touch [Paper], select the tray
1, and then touch [Change Tray Settings].
The Paper screen appears.
4
Touch [Application], and then touch [Sheet/Cover/Chapter Insert].
– To cancel all settings for the Application functions, touch [Reset].
The Sheet/Cover/Chapter Insert screen appears.
C352
8
8-3