Advanced; Upgrade; Logoff - ROHS QH-NVR User Manual

4.6.2 Advanced

Enter into Main MenuDisk ManagementAdvanced. User can check the HDD's
model, S/N, firmware, health status and S.M.A.R.T information. S.M.A.R.T function can
monitor the disk's temperature, internal circuit and dielectric material, analysis the
potential problems and warn so as to protect its data.

4.7 Upgrade

User can get the upgrade file from your dealers, and upgrade the system once NVR
has the new software version.
Upgrade steps:
1) Copy the upgrade file into the USB disk, and then insert it to USB port on the NVR.
2) Enter into Main MenuUpgrade. Click "Refresh" button to refresh the list, and find
the upgrade package in the list.
3) Select this name, click "Upgrade" button to start upgrading. Please wait for a while
when the system is restart.
Note: There can only be one upgrade package in USB disk. Don't cut off the
power in the process of formatting!
Note: NVR supports USB update only when the USB is compatible with NVR
(refer to Appendix). After the upgrade is complete, it will restart the system to
activate. If no device or file exists in the list, it is usually caused by the incompatible
USB disk.

4.8 Logoff

Enter into Main MenuLogoff. Click OK button in the warning window, it will exit the
current user's login status, and user needs to re-login to continue; click Cancel button to
return to the main menu.
Network Video Recorder User Manual
58