ROHS QH-NVR User Manual page 44

Click "Default" button to restore the default setting; click "Apply" button to save the
setting; click "Exit" button to exit current interface.
Note: User can select domain name server for NVR binding. You should visit
the website which provided by service provider and register user name and
password, and then apply a domain name on line for the server. After the
application is completed, user can access the server through IE by inputting that
domain name.
1. Enable UPnP
User may select "UPnP" and then enable UPnP function in the user's router. You can
access NVR through WAN.
When accessing the NVR through IE, user can check the IP address by the following
method: Double-click the "My Network Places" icon on the desktop in PC; select "Show
icons for networked UPnP devices" in the "Network Tasks" list box; a information window
will pop up, click "YES" button; "Windows Components Wizard" dialog box will pop up as
shown below; press "Next" to continue. After configuring components is completed, the
UPnP icon will display. User can double-click it and check the IP address of the device.
Network Video Recorder User Manual
Fig 3-32
37