Preview The Permissions; Record Configuration; Enable - ROHS QH-NVR User Manual

Click "Default" button to restore the default setting; click "Apply" button to save the
setting; click "Exit" button to exit current interface.

3.2.2.3 Preview the permissions

User can still see the channel video which enabled this function when you log out of
the system. Tick off "all" and then do relevant setup, user can set all channels with same
parameters.
Click "Default" button to restore the default setting; click "Apply" button to save the
setting; click "Exit" button to exit current interface.

3.2.3 Record Configuration

Enter into Main MenuSetupRecord.
Record configuration includes three submenus: enable, time and recycle record.

3.2.3.1 Enable

As shown in Fig 3-13. Tick off "Record" and "Audio" to enable the record and audio
switch. Tick off "all" and then do relevant setup, user can set all channels with same
parameters.
Click "Default" button to restore the default setting; click "Apply" button to save the
setting; click "Exit" button to exit current interface.
Network Video Recorder User Manual
Fig 3-12
23