Table of Contents
Advertisement
By mouse:
Step1: Enter the Main Menu, click "Shut Down" button to pop up Shut Down window.
Step2: Click OK, the unit will power off after a while.
Step3: Disconnect the power.
Notice:
1.
Please do not cut off the power when the system is shutting down.
2.
User should avoid cutting off the power by turning off the switch on the rear
panel or pulling the plug directly when the NVR is working (especially when it
is recording).
3.
Under some circumstances, the abnormal power may cause the NVR to not
work properly, and seriously it can cause the damage of NVR. We suggest
using the regulated power supply in this kind of environment.
2.8 Login
User needs to login first after system start. Double-click any preview window or click
on any menu item to pop up the login window. Input user name and password, then click
"Login" button to continue operation, as shown in Fig 2-6:
Note:
The default user name is "admin", the default password is blank.
1.
2.
The operation steps about changing password, adding and deleting users:
please refer to Chapter 3.2.7 User Management.
Network Video Recorder User Manual
Fig 2-6
14
Advertisement
Table of Contents
