Wireless Network; Other Settings - ROHS QH-NVR User Manual

3.2.6.3 Wireless Network

Step1: Insert 3G network card on the NVR. It currently supports WCDMA wireless
network card.
Step2: Enter into Main MenuSetupNetworkWireless Network; as shown in Fig
3-31.
Step3: Enable the wireless network function, then click "Apply" button to connect
automatically, please wait a moment.
Step4: After a successful connection, this interface reads out the informations
automatically, and displays wireless IP and "connected" about wireless network status.
Step5: Run "ping" command to check the fluency and link speed of network.
Step6: Click "Exit" button to exit current interface.

3.2.6.4 Other Settings

Bind the device with a fixed domain name, so that user can visit the device no matter
how the public IP changes.
Enable DDNS function, select the DDNS server and update interval, enter the user
name, password and host domain name registered in DDNS server, such as
MyNVR.no-ip.org. Click "Test" button to test the validity of the relevant information.
Enabling UPNP function can automatically map the port in use to router. As shown in Fig
3-32:
Network Video Recorder User Manual
Fig 3-31
36