Front Panel Description - ROHS QH-NVR User Manual

The steps of installing the hard disk are shown in Fig 2-1:
Step1: Disassemble the screws and open the top cover.
Step2: Use the SATA data cable and power cable to connect the main board and
HDD.
Step3: Place the HDD.
Step4: Fix the HDD, and replace the top cover and screws.
Note: 1. For convenience, please connect the power and data cables first, and then wind
the screws to fix the HDD.
2. After the hard drive installation is complete, user needs to format the HDD before
using.
Notice: Some functions cannot be used if HDD has not been installed, such as
record, playback, log storage, etc.

2.3 Front Panel Description

Note： The front panel descriptions are only for reference; please regard the actual product
as the truth.
Network Video Recorder User Manual
Fig 2-1
7