Motion - ROHS QH-NVR User Manual

Parameter
The range of options: synchronize with configured device, such as
Resolution
1080P
The range of options: synchronize with configured device, such as
1~30
Fps
(Resolution and frame rate are determined by the parameter
specifications of specific type)
Encode Two options: VBR and CBR
The range of options: synchronize with configured device, such as
Max Bitrate
1000~6000kbps
Note: If frame rate surpasses the maximum resources of device, the value will
be adjusted automatically.
Tick off "all" and then do relevant setup, user can set all channels with same
parameters.
Click "Apply" button to save the setting; click "Exit" button to exit current interface.

4.5.6 Motion

Step1: Enter into Main MenuIPC SettingsMOTION; as shown in Fig 4-14.
Step2: Enable motion detection alarm; select the alarm holding time.
Step3: Click "Setting" button of time to enter the time setting interface; as shown in
Fig 4-15.
Network Video Recorder User Manual
Fig 4-13
Meaning
53