Email - ROHS QH-NVR User Manual

Note: You may want to use a different port than the default HTTP port 80. If so,
you need to configure your NVR to use the port you want. When configured,
remember that you have to specify its port number in the URL (e.g. if you select port
88, you access it using http://192.168.1.10:88).
Click "Default" button to restore the default setting; click "Apply" button to save the
setting; click "Exit" button to exit current interface.

3.2.6.2 Email

The interface of email configure is shown in Fig 3-30.
[SMTP Server]: Outgoing Mail Server Address. Mail server addresses are different for
different Email service providers, e.g. the SMTP server of 163 mailbox is smtp.163.com,
the SMTP server of Gmail mailbox is smtp.gmail.com.
[Port]: Port number of SMTP server, usually is 25, or it may be 587, 993 or 465, etc.
[SSL Check]: Enable mail encryption function.
[Send Address/Password]: Sender's email address/password.
[Receive Address]: Receiver's email address. Here user can add three mail addresses at
most. Click "Test" button to test the validity of the mailbox.
Click "Default" button to restore the default setting; click "Apply" button to save the
setting; click "Exit" button to exit current interface.
Network Video Recorder User Manual
Fig 3-30
35