Ptz - ROHS QH-NVR User Manual

button to exit current interface. As shown in Fig 4-16:
Step5: Tick off "all" and then do relevant setup, user can set all channels with same
parameters.
Step6: Click "Apply" button to save the setting; click "Exit" button to exit current
interface.

4.5.7 PTZ

Step1: Enter into Main MenuIPC SettingsPTZ; as shown in Fig 4-17.
Step2: Click "Setting" button of preset, as shown in Fig 4-18.
User can control the PTZ operations of any channel or all channels: PTZ rotates up,
Network Video Recorder User Manual
Fig 4-16
Fig 4-17
Fig 4-18
55