ROHS QH-NVR User Manual page 18

Item
4 Digital Button
5 EXIT Button
6 BACKUP Button
7 SEARCH Button
8 SEQ Button
9 E-ZOOM Button
10 MENU Button
Multi Screen
11
Single Screen
12
Direction and
13
Enter Button
14 AUDIO Button
15 Fn Button
16 SNAP Button
Playback Control
17
18 PTZ Button
Operation processes with remote controller to control multi-NVR
The default device ID of the NVR is 0. When using a remote controller to control
single NVR, it's not necessarily to reset the device ID, user can do operation directly; when
using a remote controller to control multiple NVR, please refer to below steps:
Step1: Activate remote controller to control NVR: enable NVR, turn the IR sensor of
the remote controller to the IR receiver that on the front panel, press "add" key and then
input device ID (Range from: 1-65535) with other digital keys, after that, press ENTER
button to confirm.
Step2: User can check the device ID by enter into System configurationBasic
configurationdevice ID. User also can set other NVRs with the same device ID. For
more convenient to operate, we don't recommend user to set the device ID too long.
Step3: Cancel controller to control NVR: without any action on keys about half a
minute later, the NVR will not be controlled by remote controller.
Network Video Recorder User Manual
Name
Code input/number input/channel switch.
Return to the previous interface.
To enter the backup mode.
To enter the video playback interface.
To enter the auto dwell mode.
To electronic amplify the single channel.
To enter the sub menu.
To choose multi-screen display mode.
Button
To choose single -screen display mode.
Button
Direction Button: move cursor to select items.
Enter Button: confirm the selection.
To enter the audio adjustment interface.
Reserved function keys.
To snap the live pictures.
To control playback, pause/play, single-frame play,
Button rewind, stop, fast forward.
To enter the PTZ control interface.
Function
11