Table of Contents
Advertisement
User can set a daily schedule of motion detection. The start time should be earlier
than the end time. You can copy and apply time settings to the other date or every day.
Click OK button to save your settings, click Cancel button to exit current interface.
Step4: Click "Setting" button of area, then click and drag cursor to set the detection
area. An image can be entirely or partially masked, it supports 1 area at maximum.
Due to the sensitivity is influenced by color and time (day or night), user can drag
slider to adjust the sensitivity of motion detection (1-8) according to the practical situation.
Click
button to clear detection area; click
Network Video Recorder User Manual
Fig 4-14
Fig 4-15
54
button to save the setting; click
Advertisement
Table of Contents
