Table of Contents
Advertisement
Item
Name
13
USB Port
14
DC 12V
2.5 Remote Controller
The remote controller of this product series uses two AAA size batteries and works
after loading batteries:
Step1: Open the battery cover of the remote controller
Step2: Place batteries. Please take care the poles (+ and -)
Step3: Replace the battery cover
Note: Frequently defect checking as following:
1. Check batteries poles
2. Check the remaining charge in the batteries
3. Check IR controller sensor is mask
If it still doesn't work, please change a new remote controller to try, or contact your
dealers.
The interface of remote controller is shown in Fig 2-4:
Item
Name
1
REC Button
2
ADD Button
3
POWER Button
Network Video Recorder User Manual
Connect to USB mouse, USB disk, mobile HDD, etc.
Power input: DC 12V
Fig 2-4
To start the manual recording.
Input the number of NVR to control it.
To turn on/off the device.
10
Description
Function
Advertisement
Table of Contents
