Network Configuration; Network - ROHS QH-NVR User Manual

3. Buzzer
Tick off "Buzzer" to turn on the switch of alarm sound, set the hold time of buzzer
alarm. It will make sounds when alarm is triggered.
Click "Default" button to restore the default setting; click "Apply" button to save the
setting; click "Exit" button to exit current interface.

3.2.6 Network Configuration

Enter into Main MenuSetupNetwork.
Network configuration includes four submenus: network, Email, wireless network and
other settings.

3.2.6.1 Network

The interface of network configure is shown in Fig 3-29.
User can set the device's HTTP port and server port. If DHCP function of router is
enabled, selecting "Obtain an IP address automatically" will automatically obtain IP
address, subnet mask and gateway from the router.
Using DDNS function outside this area needs to set the address of DNS server as
their local DNS address. Enable PPPoE dial-up function, user needs to enter the user
name and password of ADSL dial-up obtained from the internet service provider. Click
"Test" button to test the effectiveness of the relevant information.
Network Video Recorder User Manual
Fig 3-29
34