Mask; Record Bitrate - ROHS QH-NVR User Manual

Tick off "all" and then do relevant setup, user can set all channels with same
parameters.
Click "Apply" button to save the setting; click "Exit" button to exit current interface.

4.5.4 Mask

Enter into Main MenuIPC SettingsMask. User can set private mask area on the
live screen, as shown in Fig 4-12.
[Set mask area]: Click "Setting" button, then click and drag cursor to set the privacy area
of video image. An image can be entirely or partially masked, it supports 4 areas
(superposable) at maximum. Click right mouse to return to the previous interface.
[Delete mask area]: Double click the mask area to delete it, click right mouse to return to
previous interface.
Click "Apply" button to save the setting; click "Exit" button to exit current interface.

4.5.5 Record Bitrate

Enter into Main MenuIPC SettingsRecord Bitrate. User can set the resolution,
frame rate, encode and max bitrate of each channel recording, as shown in Fig 4-13.
Network Video Recorder User Manual
Fig 4-12
52