Table of Contents
Advertisement
Preparing for installation
To replace the front bezel after installation is complete
When the CallPilot server installation is complete and the server is in its final location, replace
the front bezel.
1. Align the front bezel with the ball studs located at each faceplate corner.
2. Apply pressure evenly until the bezel snaps onto each ball stud.
3. Close and lock the double doors of the front bezel.
®
32
Avaya CallPilot
1002rp Server Hardware Installation
IF
See the diagram below:
THEN
Note:
Do not reinstall the front bezel until
the server is in its final location and
the CallPilot installation is complete.
December 2010
Advertisement
Table of Contents
