Sending A Trunk Flash - Siemens OpenStage 60 User Manual

Step by Step
Calls g
Trunk flash

Sending a trunk flash

To activate ISDN-type services and features through the
network carrier's analog trunks or those of other com-
munications platforms (such as "consultation hold"), you
must send a signal to the trunks before dialing the ser-
vice code or telephone number.
Prerequisite: You have set up an external connection.
v
Open the Program/Service menu
Select and confirm the option shown.
Select and confirm the option shown.
j
Enter the service code and/or telephone number.
Enhanced phone functions
page 41.
77