Attaching The Drive Module To A Mounting Plate Or Wall; Alternatives For Grounding The Drive Module - ABB ACS580-04 Hardware Manual

Attaching the drive module to a mounting plate or wall


Use the support bracket if you attach the drive module directly to a mounting plate or wall.
The support bracket prevents the drive module screws from chafing against the plate.
M4×12 Torx

Alternatives for grounding the drive module


You can ground the drive module from its top back to the cabinet frame with these
alternatives:
1. from the grounding hole
2. to a Rittal punched section: with the fastening bracket.
1
Installation instructions 75
2
Tapping screw M6×12 Torx T30 (Hex) 9 N·m