Layout Example, Door Open (Standard Drive Module Configuration) - ABB ACS580-04 Hardware Manual

Layout example, door open (standard drive module configuration)


2e
2a
13
13
A
4
2e
2a
5
6
3
2b
L1/U1
L2/V1
L3/W1
2d
9
12
PE
3 T3/W2
T2/V2
T1/U2
8 10
A
1 Supporting frame of the cabinet
2 Vertical (2a, 2b) and horizontal (2c, 2d) air
baffles that separate the cool and hot areas
(leak-proof lead-throughs). See also page
45.
2e Optional air baffle that is needed when there
is no fan on the lower part of the cabinet
door (see 1b on page on 38)
3 Cabinet grounding busbar (PE)
4 Input power cable including the protective
ground conductor (PE) of the drive
5 Disconnector and fuses
6 Contactor
7 Drive module
Note 1: The power cable shields can also be grounded to the drive module grounding
terminals.
Note 2: See also section
1
2c
7
11
10 External control cables
12 Alternative to grounding screws (11)
13 Air flow to the roof
14 Air flow through the drive module
15 Air flow through circuit boards and to DC output busbars
Required free space, page 49.
Guidelines for planning the cabinet installation 39
8 Motor cable including the protective ground conductor
of the drive module
9 Drive module control unit. Note: With the internal
control unit, the upper door air inlet is critical for proper
cooling of the control board.
11 Grounding screws
- -
13
15
14
A – A