Features; X930 Models; 10/100/1000 Mbps Twisted Pair Ports; Power Over Ethernet - Allied Telesis AT-x930-28GTX Installation Manual

Features

x930 Models

10/100/1000
Mbps Twisted
Pair Ports
Power Over
Ethernet

SFP Slots

Here are the switches and their features:
Here are the switches in the x930 Series:
 AT-x930-28GTX
 AT-x930-28GPX
 AT-x930-28GSTX
 AT-x930-52GTX
 AT-x930-52GPX
Here are the basic features of the 10/100/1000 Mbps twisted pair ports:

24 or 48 ports per switch

10Base-T, 100Base-TX, and 1000Base-T compliant

IEEE 802.3u Auto-Negotiation compliant

Auto-MDI/MDIX

100 meters (328 feet) maximum operating distance

IEEE 802.3x flow control in 10/100Base-TX full-duplex mode
 IEEE 802.3x backpressure in 10/100Base-TX half-duplex mode
 IEEE 802.3ab 1000Base-T
 Jumbo frames up to 13KB
 RJ-45 connectors
Here are the basic features of Power over Ethernet (PoE) on the twisted
pair ports on the AT-x930-28GPX and AT-x930-52GPX Switches:
 Supported on ports 1 to 24 on the AT-x930-28GPX Switch and
ports 1 to 48 on the AT-x930-52GPX Switch
 Supports PoE (15.4 watts maximum) and PoE+ (30 watts
maximum) powered devices
 Supports powered device classes 0 to 4
 Port prioritization
 Mode A wiring
Here are the basic features of the twenty four SFP slots on the AT-x930-
28GSTX Switch:

Supports 100Base-FX, 1000Base-T, and 1000Base-SX/LX SFP
transceivers
x930 Series Installation Guide for Stand-alone Switches
17