Total Reset; Other Adjustments; Change Numcan; Inverter Data - Ingecon Sun 250 M220 Indoor Installation Manual

Ingeteam

Total reset

With this option, the user can reset all inverter counters. This menu is only active after the security code has been
input.

other adjustments

Various internal adjustments.

change numcAn

From this menu you can change the electronics blocks' node number. This is needed for configuring the electronics
blocks. Because this action involves hardware-altering operations, instructions for changing the node number are
given at the unit's set point.

8.7. Inverter data

This window displays inverter-specific data:
Serial number (Sn)
Firmware Version (Firm)
Display firmware version (FirmDis)
Boot version of the display (BootDis)

8.8. change inverter number

From this menu you can assign the inverter a number. This is required for configuring communications.
use the and keys to change the inverter number. Press
74
17:54 17:54
number that identifies the inverter.
Shows the name and version of the inverter firmware.
Shows the name and version of the inverter display.
Shows the name and version of the display Boot.
03/08/12 03/08/12
to confirm the number selected.
Installation manual
AAV2000IKI01