Grid Quality; Ground Connection; Connection Time; Total Reset - Ingecon SUN 125 U 208 Outdoor Installation Manual

Ingeteam
Press the button to scroll through the various languages and

Grid quality

In this menu, you can change the grid quality parameters. This menu is only active after the security code has been
input.

Ground connection

Through this option, you can change the type of grounding for the PV array. This menu is only active after the security
code has been input.

Connection time

This menu allows you to modify the delay before the inverter connects to the grid. This menu is only active after the
security code has been input.

Total reset

With this option, the user can reset all inverter counters. This menu is only active after the security code has been
input.

Other adjustments

Various internal adjustments.

Change NumCAN

From this menu you can change the node number. This is useful for units with more than one electronics block, and
should not be changed on the unit unless so instructed by Ingeteam.

8.7. Inverter data

This window displays inverter-specific data:
Serial Number (NS)
Firmware Version (Firm)
Display firmware version (FirmDis)
Boot version of the display (BootDis)
70
17:05 17:05
English English
17:05 17:05
Number that identifies the inverter.
Shows the name and version of the inverter firmware.
Shows the name and version of the inverter display.
Shows the name and version of the display Boot.
24/06/12 24/06/12
to confirm the selection.
24/06/12 24/06/12
Installation manual
ABB2000IKI01