Ingecon Sun 250 M220 Indoor Installation Manual page 16

Ingeteam
500 M220 Indoor, 625 M275 Indoor, 730 M320 Indoor, 800 M345
Indoor, 840 M360 Indoor
Acceptable pressure loss is 34 Pa and air inlet velocity less than 3 m/s.
Do not place any object on top of the unit.
Avoid dropping particles that could enter the unit through air vents.
Facilitate the flow of air entering through the front ventilation grids, and the exhaust air through the
top grids.
If the unit is installed inside a cabin, a plenum will have to be installed to ensure the ventilation of the unit as shown
in the figure below.
16
Model
Installation manual
Airflow (m3/h)
5340
AAV2000IKI01