Handling And Unpacking - Ingecon Sun 250 M220 Indoor Installation Manual

Ingeteam
Identifying the unit
The serial number of the equipment is its unique identifier. This number must be quoted in any communication with
Ingeteam.
In addition to the unit serial number, each electronics block has its own serial number indentified by the last digit.
The serial number (S/n) ending in 0 is for the complete unit, and the serial number ending in 1, 2, 3 and 4 is for its
respective electronics blocks. For example, electronics block number 2 will feature the following ratings plate:
The ratings plate of the electronics blocks can be found on a prominent place inside the cabinet.
Transport damage
If the equipment has been damaged during transport, proceed as follows:
1. Do not proceed with the installation.
2. notify the distributor immediately within 5 days of receipt of the equipment.
If ultimately the unit has to be returned to the manufacturer, you must use the same original packaging.

3.3. Handling and unpacking

correct handling of the units is vitally important in order to:
• Prevent damage to the packaging which enables them to be kept in optimum condition from shipping until
they are unpacked.
• Avoid knocks and/or falls which may harm their mechanical characteristics, e.g. cause incorrect closure of
doors, loss of IP rating, etc.
• Avoid, as far as possible, vibrations which may cause subsequent malfunction.
If you observe any anomaly, please contact Ingeteam immediately.
22
INGECoN SUN 500 M220
Pac
Uac:
S/N
Std:
Location of the unit's ratings plate
INGECoN SUN 500 M220
Indoor
Pac 500 kW
Uac: 3 x 230 Vac
S/N 500080102R52
Std:
A
vda. Ciudad de la Innovación, 13
IP20
Indoor
500 kW Udc:
3 x 230 Vac Freq:
500080102R50
Avda. Ciudad de la Innovación, 13
31621 Sarriguren (Navarra)
solar.energy@ingeteam.com
Tel 948 288000
Fax 948 288001
IP20 2011
Udc: 405 - 1000 Vdc
Freq: 50 Hz
Installation manual
31621 Sarriguren (Navarra)
solar.energy@ingeteam.com
Tel 948 288000
Fax 948 288001
2011
405 - 1000 Vdc
50 Hz
AAV2000IKI01