Environmental Characteristics; Characteristics Of The Electrical Installation; Emc Requirements - Ingecon Sun 250 M220 Indoor Installation Manual

Ingeteam
250 M220 Indoor, 315 M275 Indoor, 365 M320 Indoor, 400 M345 Indoor, 420
M360 Indoor
375 M220 Indoor NAC, 500 M275 Indoor NAC, 550 M320 Indoor, 600 M345
Indoor, 630 M360 Indoor
375 M220 Indoor, 500 M275 Indoor, 550 M320 Indoor, 600 M345 Indoor, 630
M360 Indoor
500 M220 Indoor NAC, 625 M275 Indoor NAC, 730 M320 Indoor NAC, 800
M345 Indoor NAC, 840 M360 Indoor NAC
500 M220 Indoor, 625 M275 Indoor, 730 M320 Indoor, 800 M345 Indoor, 840
M360 Indoor

2.2. environmental characteristics

The environmental conditions for operation are:
For further information see chapter "3. Operating, conservation and transport conditions".

2.3. characteristics of the electrical installation

IngecOn Sun PowerMax units are designed for connection to a dedicated network with an IT-type neutral connec-
tion scheme.
An IT scheme has no directly grounded feed point.
In this system, the resulting intensity of a first phase against mass or phase against ground fault is sufficiently low as
to not cause the appearance of dangerous contact voltages.

2.4. eMc requirements

The IngecOn Sun PowerMax units are equipped with the necessary filtering elements to comply with eMc require-
ments for industrial applications in order to prevent disturbances in other equipment outside the installation.
All IngecOn Sun PowerMax units are connected to the grid through a low to medium voltage transformer with a
Star-Delta configuration. This transformer gives the unit galvanic isolation that affects its good performance in terms
of noise emission. This is why:
Any auxiliary element must be connected to the low voltage network powering the IngecOn Sun
PowerMax units via a galvanic isolation transformer.
20
equipment
Ambient conditions
Minimum temperature
Minimum surrounding air temperature
Minimum surrounding air temperature
Maximum relative humidity without condensation
Installation manual
Space
Rectangle 2675 x 1020 mm
Rectangle 2652 x 1020 mm
Rectangle 3274 x 1020 mm
Rectangle 3274 x 1020 mm
Rectangle 3896 x 1020 mm
-20 °C
-20 °C
65 °C
95%
AAV2000IKI01